Ft.
inch.
Ft.
inch.
No.1 for tall men say from
5
9
to
6
0
No. 2, for men of medium size say from
5
7
to
5
9
No. 3, for short men, say from
5
5
to
5
7
(a) Boots and shoes can be had in sizes 3 to 12 and in fittings, 4, 5 and 6. Special size boots and shoes can be made to order. "Size", indicates the length of the feet and "fitting" the girth. Measurement should be taken with the help of an inch tape from the heel to the longest-toe. Men whose feet are being measured should be asked to stand erect with their feet on the inch tape on an even board or floor throwing full weight of their bodies on their feet. The measurement of fitting should be taken by passing the inch tape round the feet and leg at joint (about 3 inches from the toe) a instep (about 5 inches from the toe) at heel (from the extreme bottom of the heel round the upper angle of feet and leg) and at ankle (about 5 ½ inches from the heel). Scale of measurement in the form as shown below should be called for from the firms supplying the footwear and sizes and fitting indicated on the inch tape with the corresponding size and fitting in the scale of measurement should be noted in the indent to avoid misfit.
Foot length by inch tape.
Length. Boot required.
Sizes and fittings
Joints
Instep.
Heel.
Ankle.
In inches
In size.
In-inches
Inches.
Inches.
Inches.
Inches.
8 ½
3...9 ⅓
3-4...
8 ¼
8 ¾
12
7 ¾
3-5...
8 ½
9
12 ⅜
8
3-6...
8 ¾
9 ¼
12 ¾
8 ½
For boots-Length of feet, joint, instep, heel and ankle.
For Derby shoes-Length of feet, joint, instep and heel.
For Munda shoes-Length of feet, joint and instep.
473.
Section 472 • Instructions issued by the Board of Revenue under Bihar and Orissa Excise Act, 1915
472. Indent.
instructions-issued-by-the-board-of-revenue-under-bihar-and-orissa-excise-act-1915-sec-472.json
•
Section 472
{
"act_title": "Instructions issued by the Board of Revenue under Bihar and Orissa Excise Act, 1915",
"act_slug": "instructions-issued-by-the-board-of-revenue-under-bihar-and-orissa-excise-act-1915",
"section_label": "Section",
"section": {
"number": "472",
"title": "472. Indent.",
"chapter": null,
"content": "Ft.\ninch.\nFt.\ninch.\nNo.1 for tall men say from\n5\n9\nto\n6\n0\nNo. 2, for men of medium size say from\n5\n7\nto\n5\n9\nNo. 3, for short men, say from\n5\n5\nto\n5\n7\n(a) Boots and shoes can be had in sizes 3 to 12 and in fittings, 4, 5 and 6. Special size boots and shoes can be made to order. \"Size\", indicates the length of the feet and \"fitting\" the girth. Measurement should be taken with the help of an inch tape from the heel to the longest-toe. Men whose feet are being measured should be asked to stand erect with their feet on the inch tape on an even board or floor throwing full weight of their bodies on their feet. The measurement of fitting should be taken by passing the inch tape round the feet and leg at joint (about 3 inches from the toe) a instep (about 5 inches from the toe) at heel (from the extreme bottom of the heel round the upper angle of feet and leg) and at ankle (about 5 ½ inches from the heel). Scale of measurement in the form as shown below should be called for from the firms supplying the footwear and sizes and fitting indicated on the inch tape with the corresponding size and fitting in the scale of measurement should be noted in the indent to avoid misfit.\nFoot length by inch tape.\nLength. Boot required.\nSizes and fittings\nJoints\nInstep.\nHeel.\nAnkle.\nIn inches\nIn size.\nIn-inches\nInches.\nInches.\nInches.\nInches.\n8 ½\n3...9 ⅓\n3-4...\n8 ¼\n8 ¾\n12\n7 ¾\n3-5...\n8 ½\n9\n12 ⅜\n8\n3-6...\n8 ¾\n9 ¼\n12 ¾\n8 ½\nFor boots-Length of feet, joint, instep, heel and ankle.\nFor Derby shoes-Length of feet, joint, instep and heel.\nFor Munda shoes-Length of feet, joint and instep.\n473.",
"footnote": "",
"is_definition": false,
"sort_order": 388
},
"prev_section": "471",
"next_section": "474"
}